◇Blcg 23ss yellow tape printed short sleeves-Clothing-Yupoo

◇Blcg 23ss yellow tape printed short sleeves

◇Blcg 23ss yellow tape printed short-sleeved #Custom-woven, dyed and washed blue and black worsted cotton material. The fabric is made of 32S/1*2 fine cotton double yarn plain weave, 230 grams; matched with 32S + 70D stretcher 95/fine cotton*5% spandex double Yarn rib. Using blending technology, combed cotton fabric is woven, making the fabric very soft to the touch. The worsted cotton material is light and breathable, has a strong cotton feel on the hand, is breathable and hygroscopic; it is not easy to wrinkle and does not require special care. The 32-needle high-end textile introduced by the rib, 70D ultra-fine elastic stitching, nearly non-sensory routing, comfortable and fit the body shape, the fabric is also specially customized and dyed blue and black, and then sand washed to achieve this effect #duct tape element letter number The letter pattern is pieced together in the style of direct-injection process tape, and the details of the pattern design are processed in one step. The bottom layer is made of white reinforced glue, and penetration technology is used to consolidate the printing function. The imported Kornit three-dimensional direct printing equipment truly restores many details and color differences of the original version. It adopts an environmentally friendly drying process and can complete exquisite printing in just one step. The back letter glue printing process is based on the original version. After adjusting the details, an extremely fine gauze material is used to make the film screen. Imported environmentally friendly glue is used to join the penetration process. After technical processing of the printing screen, the firmness is increased, so that the slurry can penetrate into the fabric where there is a pattern, and the permeability is strong and the fabric texture is clearly visible. After printing the garment, the sanding and distressing process is carried out. The gray fabric is made of garment. It is made by frying process after printing. The new environmentally friendly process of ready-made garments is dyeing, washing and aging. The fabric is dyed by stone grinding, and the garments are continuously immersed in the dye and tumbled, so that the dyed fabric will have a certain amount of white at the edge of the color. After sanding, the fabric turned slightly white, and the details of the whole body were frayed. The whole dress was damaged in many places. The color of the original fabric was changed to show a nostalgic color with different shades of light and dark #High collar oversize loose version Oversize loose silhouette design, basic style The round neckline has dropped shoulder lines, and vertical pit woven codes are used from top to bottom. The collar, cuffs, and hem all have ruffles for windproof effect. The sleeve length is longer than that of a regular sweater to highlight the details. The thickness of the ready-made garment is the same as the original version, and it is also shaped. The upper body is wide and not easy to deform. Size: XS-L #Details explainedIt can be seen that the printing on the back has a glue-drenched feeling in the overlapping position, and the three-dimensionality is more obvious than the front one, as if it is covered layer by layer. Only the original Kornit 3D Direct Inkjet+ This effect can be achieved only by hand screen printing 2024#BYJH4400123